G1013 HART to FF Gateway, designed by Microcyber Corporation is a gateway device for HART protocol and FF protocol. As HART master, G1013 HART to FF Gateway communicates with HART slave via HART interface, it can convert dynamic variables in the device to FF device variables output.
G0306 gateway can realize interconnection from Modbus RTU device to fieldbus PROFIBUS DP, and protocol conversion between Modbus RTU and PROFIBUS DP/V0. The user can make multiple Modbus RTU devices access to PROFIBUS DP network only by GSD file configuration.
24V DC power supply, standard PROFIBUS DP interface, rapid to diagnose device working state by indicator lights, easy to use.
G0306 has combined high reliability and flexibility, being indispensable internet tool of all industries of system integrators and plant operating personnel.
● | Support 31 Modbus RTU slave devices at most | ||
● | Be tallied with PROFIBUS-DP/V0 protocol stipulations | ||
● | Support 244 input, 244 output, 244 parameters at most | ||
● | Modbus RTU and PROFIBUS DP configured flexibly by GSD files | ||
● | Transparent data transfer of Modbus RTU and PROFIBUS DP | ||
● | PROFIBUS DP address set up by hardware | ||
● | 35mm rail, easy to install | ||
● | Frequency converter, motor start protection device, transmitters, intelligent measuring device and instrument, etc. with MODBUS protocol interface |
Working Temp. | -20 ... +70 °C | ||
Storage Temp. | -40 °C ... +85 °C | ||
Working Pressure | 9 … 36 V / 14 mA@ 24 V | ||
Dimension (L x W x H) | 112.5 x 52 x 70 mm (without connector) | ||
Interface | RS485 | ||
Indicator Light | SYS, APL, L/A, Rx/Tx, bus-specific | ||
Weight | 150 g | ||
Protocol before conversion | Modbus | ||
Protocol after conversion | DP | ||
EMC | GB/T 18268.1 | ||
Noise Interference | EN 61131-2:2003 | ||
Installation | DIN-Rail, EN-50022 35mm x 7,5mm |
G0307 realizes converting from Modbus RTU to PROFIBUS PA, makes multiple Modbus RTU slave devices access to PROFIBUS PA network. All related Modbus configuration is done by EDD, powerful, convenient and quick. Can be widely used in many industry fields.
● | Support 4 Modbus RTU slave devices’ access at most | ||
● | Each Modbus RTU slave device is assigned 4 function blocks by default, each function block is one piece. | ||
● | Modbus RTU interface can configure bus terminal, 24VDC external power supply required | ||
● | Support PROFIBUS PA 3.02 | ||
● | Configure PROFIBUS address by software or hardware | ||
● | PROFIBUS PA is powered by bus | ||
● | 4 function blocks, AI/AO/DI/DO, each is four pieces, totally 16 function blocks, ahead of similar products | ||
● | Support GSD files, total 16 channels, each has one fixed function block, each function block can be configured a variety of modules |
Working Temp. | -20 ... +70 °C | ||
Storage Temp. | -40 °C ... +85 °C | ||
Working Pressure | 9 … 36 V / 14 mA@ 24 V | ||
Dimension (L x W x H) | 112.5 x 52 x 70 mm (without connector) | ||
Interface | RS485 | ||
Indicator Light | SYS, APL, L/A, Rx/Tx, bus-specific | ||
Weight | 150 g | ||
Protocol before conversion | Modbus | ||
Protocol after conversion | PA | ||
EMC | GB/T 18268.1 | ||
Noise Interference | GB 9254 | ||
Installation | DIN-Rail, EN-50022 35mm x 7,5mm |
G0313 realizes converting from Modbus RTU to FF H1. G0313 can effectively reduce development difficulty to transform from Modbus device to FF device, easily upgrade Modbus RTU device. Sophisticated design, easily installed on DIN rail in control box or protection box on site. To connect Modbus slave device via simple configuration, so as to realize converting from Modbus RTU to FF. One gateway can take at most four Modbus RTU slave devices, cost-effective. To judge whether G0313 works in normal by LED indicators during field application.
● | Support 4 Modbus RTU slave devices’ access at most | ||
● | Support AI/AO/DI/DO, each support 8 channels | ||
● | 1 Modbus transducer block | ||
● | 4 PID function blocks | ||
● | 1 RES function block tallied with FF standard | ||
● | Modbus RTU device upgrade | ||
● | Side wiring diagram and parameter description | ||
● | DIN rail installation | ||
● | Working status indicating LED |
Working Temp. | -20 ... +70 °C | ||
Storage Temp. | -40 °C ... +85 °C | ||
Working Pressure | 9 … 36 V / 14 mA@ 24 V | ||
Dimension (L x W x H) | 114.5 x 22.5 x 99 mm (without connector) | ||
Interface | RS485 | ||
Indicator Light | SYS, APL, L/A, Rx/Tx, bus-specific | ||
Weight | 150 g | ||
Protocol before conversion | Modbus | ||
Protocol after conversion | FF | ||
EMC | GB/T 18268.1 | ||
Noise Interference | GB 9254 | ||
Installation | DIN-Rail, EN-50022 35mm x 7,5mm |
G0310 Modbus to HART Gateway, designed by Microcyber Corporation is a gateway device for Modbus-RTU protocol and HART protocol. As Modbus master, G0310 Modbus to HART Gateway communicates with devices that have Modbus-RTU communication function via RS485 interface. It can convert device data to HART device variables output, and it also supports 4~20mAcurrent output.
● | Be tallied with HART7.0 | ||
● | HART slave and Modbus master mode | ||
● | 4~20mA analog signal overlay HART digital signal | ||
● | Support 1 Modbus slave device | ||
● | Support 6 device variables and 4 dynamic variables | ||
● | Configure gateway by HART interface | ||
● | Write protect user data | ||
● | Support high/low alarm current | ||
● | RS485 Modbus interface | ||
● | LED power and communication indicating | ||
● | Standard DIN rail installation |
Working Temp. | -20 ... +70 °C | ||
Storage Temp. | -40 °C ... +85 °C | ||
Working Pressure | 12 … 42 V | ||
Dimension (L x W x H) | 114.5 x 22.5 x 99 mm (without connector) | ||
Interface | RS485 | ||
Indicator Light | SYS, APL, L/A, Rx/Tx, bus-specific | ||
Weight | 150 g | ||
Protocol before conversion | Modbus | ||
Protocol after conversion | HART | ||
EMC | GB/T 18268.1 | ||
Noise Interference | GB 9254 | ||
Installation | DIN-Rail, EN-50022 35mm x 7,5mm |
G1003 gateway realizes protocol converting from HART to Modbus RTU / ASCII. Supporting to connect multi HART slave devices into Modbus network. In the gateway, HART terminal is master station, Modbus terminal is slave station.
● | Be tallied with HART7.0 | ||
● | HART master and Modbus slave mode | ||
● | 4~20mA analog signal overlay HART digital signal | ||
● | Support 15 HART slave device | ||
● | Configure gateway by special software | ||
● | Write protect user data | ||
● | RS485 Modbus interface | ||
● | LED power and communication indicating | ||
● | Standard DIN rail installation |
Working Temp. | -20 ... +70 °C | ||
Storage Temp. | -20 ... +70 °C | ||
Power Supply | 9~30VDC | ||
Dimension (L x W x H) | 114.5 x 22.5 x 99 mm (without connector) | ||
Modbus Interface | RS-232/RS-422/RS485 | ||
HART Interface | HART digital signal | ||
Indicator Light | SYS, APL, L/A, Rx/Tx, bus-specific | ||
Weight | 150 g | ||
Protocol before conversion | HART | ||
Protocol after conversion | Modbus | ||
EMC | GB/T 18268.1 | ||
Noise Interference | GB 9254 | ||
Installation | DIN-Rail, EN-50022 35mm x 7,5mm |
G1013 HART to FF Gateway, designed by Microcyber Corporation is a gateway device for HART protocol and FF protocol. As HART master, G1013 HART to FF Gateway communicates with HART slave via HART interface, it can convert dynamic variables in the device to FF device variables output.